v2.54

Added option to the GameObject menu to bake a MegaShapes Loft to a simple Gameobject prefab.

v2.53

MegaShapes fully compatible with Unity 6

v2.52

Added a Terrain Carve demo scene for the race track that shows it in use.

v2.51

Added missing ContainsSubDiv method to MegaShape which is used by MegaScatter

v2.50

New version of the RBody path follow script which allows for lateral movement while following a spline.

v2.49

Fixed a bug which stopped spline knots from being moved that was introduced in v2.48

v2.48

Fix for missing function errors in 2021.3

v2.47

Fixed obsolete warnings when using Unity 2022.2

Removed stray Debug.log

Fixed a small error in the loft layer simple and loft layer multimap when using cross sectionscale curves, the last cross section gets scaled by the start of the curve.

v2.46

Added back in missing pot from Pottery demo scene

Added extra checks to loft layers for zero length splines.

v2.45

Fixed errors in Unity 2022.1 regarding FindObjects missing method.

v2.44

MegaShapes made fully compatible with Unity 2023

v2.43

Note: You only need to update to this version if you are using Unity 2019.4 or newer and want to use MegaFiers 2 in your project as well.

Before installing this version you will need to remove any previous version of MegaShapes first.

All scripts are now in the 'MegaFiers' namespace, this might be code breaking so please backup any projects before updating.

Fixed dup script errors when installing MegaFiers 2 and MegaShapes in the same project

Fixed demo scenes that had lost their mesh/object references due to Unity version updater losing them

v2.42

MegaUtils.cs renamed to MegaShapeHelper.cs to avoid name comflicts when installed alongside MegaFiers 2

MegaMatrix.cs renamed to MegaShapeMatrix.cs to avoid name comflicts when installed alongside MegaFiers 2

MegaBox3.cs renamed to MegaShapeBox3.cs to avoid name comflicts when installed alongside MegaFiers 2

MegaXMLReader.cs renamed to MegaShapeXMLReader.cs to avoid name comflicts when installed alongside MegaFiers 2

v2.41

Fixed some issues in the Spline Auto Smooth system where expecially on open splines the end point handles could be wrong.

MegaShapes made fully compatible with Unity 2022

v2.40

Fixed the GUILayer not used any more in the demo scenes.

Adjusted a couple of demo scenes where some references were missing after scene conversion.

v2.39

MegaShapes made fully compatible with Unity 2021

v2.38

Fixed error in MegaGrab in Unity 2020.2

v2.37

Fixed an issue with Unity 2020 where knots on splines could not be dragged

v2.36

MegaShapes made fully compatible with Unity 2020

v2.35

Fixed issue with spline Undo system where it would not apply the last undo on the stack correctly.

MegaShapes made fully compatible with Unity 2019.2

MegaShapes made fully compatible with Unity 2019.3

v2.34

MegaShapes made fully compatible with Unity 2018.3

MegaShapes made fully compatible with Unity 2019.1

v2.33

Fixed an issue which stopped spline editing from working in Unity 2017.4

v2.32

MegaShapes made fully compatible with Unity 2018.2

v2.31

Fixed the Autocurve not computing correct handles for last point on open spline.

Snapping improved.

MegaShapes made fully compatible with Unity 2018.1

v2.30

Fixed issue in Unity 2017.2 where splines could not be changed or knots moved in the scene view.

MegaShapes made fully compatible with Unity 2017.2

MegaShapes made fully compatible with Unity 2017.3

v2.29

The Undo for MegaShapes now recognizes adding and deleting of knots as well other the other options that change the spline such as Autocurve, scale etc.

v2.28

Fixed a bug where splines were being deleted if the 'Add' option was used when Loading a spl file.

Added OBJ exporter system to easily export loft mesh objects or any other mesh object, can also export animated meshes to OBJ sequences.

v2.27

Updated MegaUtils.cs so if MegaShapes and MegaFiers installed their wont be missing methods.

MegaShapes made fully Unity 2017 compatible.

v2.26

Changes made for the latest Unity 5.6 obsolete methods for the final release of Unity 5.6

v2.25

Fixed a problem with the Position handles when editing splines.

Splines now default to Free Handle mode for editing.

v2.24

MegaShapes is fully 5.6 compatible.

Fixed negative dist value in terrain carve component causing an exception.

Added new improved spline smoothing, you can now choose between old and new smoothing modes in the Shape Inspector. New method will produce a perfectly smooth spline through all the control points.

Added option to auto smooth the spline when you drag a knot, this will recalc the knot control points if you have changed any.

Lofts etc will auto update if a spline knot is deleted now.

Lofts etc will auto update if a spline is reversed now.

Rewritten the spline editing bit, making it easier to select and move spline knots and handles.

Move gizmos are now only shown for the currently selected knot.

To edit a spline knot you just need to click the green sphere for the point you want to edit, that will then select that point.

Option to freeze y movement when editing spline points, useful if using the free move handle type.

No need to click and drag mid point gizmos to add a new point you can now just click the circle to add a new knot.

Move handles now point along the spline.

Added extra circle gizmo at end of open spline for easier creation of splines by easily allowing addition of knot on the end.

Add Undo system for spline editing, you can now undo any changes made to a splines knots by clicking the Undo Edit Spline button.

Added option to set the max Undos that can be stored.

Added option to Walk Loft Smooth to use a raycast, useful if your loft is conformed to the ground or otherwise moved from the loft spline.

v2.23

Fixed bug that caused splines to get corrupted if you tried to use the Spline animation builder on a spline with an imported animation.

v2.22

Added the missing SetHandles method to the MegaShapes API.

v2.21

MegaShapes fully Unity 5.5 compatible.

Layer field for the Rope collision field now shows all the layers correctly.

Fixed bug with rope collisions not using the selected layer value correctly.

Moved the New Hose system source file from the editor folder to the correct folder. You may need to delete the MegaHoseNew.cs file in the editor folder after an update.

Added new Hose Attach system that uses the new hose system.

v2.20

Added a new version of the hose system that works correctly when end nodes are transformed or moved. Use 'Hose New' instead of 'Hose'.

v2.19

Optimized the Lathe mesh builder.

Improved the Lathe Normal calculation system so it works correctly for all cases.

Fixed the mesh array size errors in the Lathe system when reducing the vertex count.

Fixed the Regex error in the SVG importer when building for a Windows Store App

Editing of splines is now disabled if an Alt key is down, stops accidental editing of splines while changing the scene view.

v2.18

Added simple demo scene showing the RBody following a path component.

v2.17

Fixed error with Spline Fill mesh when being used as a collider with zero thickness.

v2.16

MegaShapes fully compatible with Unity 5.3

v2.15

Train demo scene fixed so the train works correctly in Unity 5.x

Fixed main demo scene where one of the lofts had no objects selected causing an exception.

v2.14

Fixed a problem in Unity 5.x where zero length tris would cause an error and stop the collider being built.

v2.13

Fixed exception in inspector if you happen to create a spline with no knots in it.

Added option to turn of the autosmooth when a new knot is added to the spline.

Also added the AutoCurve option when the Add Knot button is clicked

Fixed bug in the Lathe system where normals were pointing the wrong way

v2.12

Fixed exception bug in the spline notify system that could appear when loft layers which do not use crosssections are used.

Added conform option to the Clone spline layer so can now easily make fences etc fit the terrain

Added conform option to the Clone spline Rules layer so can now easily make fences etc fit the terrain

Added conform option to the Clone spline Simple layer so can now easily make fences etc fit the terrain

Added conform option to the Scatter spline layer so can now easily make fences etc fit the terrain

v2.11

Changes for Unity 5.1, removal of obsolete items etc.

v2.10

Fixed MegaShapeLightMapWindow problem when doing an app build.

You can now build lightmap data for MegaShape standard meshes.

Changed OSM importer to use ulong for ids instead of int so can now handle complex OSM files.

v2.09

Added a new demo scene to show a RBody being controlled by a spline. Car model kindly provided by www.uistudios.com

v2.08

Fixed Shape labels being displayed if behind the camera.

Added a beta OSM data importer. Click the Assets/Import OSM option.

v2.07

Added example script showing how to move a RigidBody object along a spline with forces.

Added FindNearestPointXZ and FindNearestPointXZWorld methods to MegaShape API.

Improved Move RigidBody along spline system example script MegaShapeRBodyPathNew, note it is an example script for you to base your own on.

Added a break force option to RigidBody spline follow.

Added more options to the Move Rigidbody along a spline script.

v2.06

Changed Clone Spline simple so position of layer is not linked to spline position, no need to duplicate the spline if used multiple times.

Changed Clone Spline so position of layer is not linked to spline position, no need to duplicate the spline if used multiple times.

Changed Clone Spline Rules so position of layer is not linked to spline position, no need to duplicate the spline if used multiple times.

Fixed exception if trying to build a mesh with a shape with no splines.

Fixed exception if trying to interpolate along a shape with no splines.

Fixed exception if trying to interpolate a spline with no knots.

v2.05

Remove the SetActive warning from Draw Loft Component.

Added in the Mega Mesh Page component.

Mega Shapes